CSC Motorcycles Offers the BEST E-Bike for LESS!

CSC Motorcycles has a well-earned reputation for delivering full-featured motorcycles at huge savings direct to the buyer. CSC models combine the most popular features, volume production and direct sales to offer motorcycles with upgraded components for less than the stripped-down models from competitors. Direct sales – bypassing dealer markups and added fees – saves CSC buyers hundreds of dollars.

NOW, CSC brings this same smart sourcing and money-saving direct delivery to electric bicycles with the new XP750-26 and XP750-20. These fat-tire bikes are loaded with solid designs, top quality components and accessories typically found in bikes that sell for hundreds more. Delivered to your door for only $1,768 for the 20 inch or $1,788 for the 26 inch with free rear rack and fenders for a limited time, the new CSC E-bikes are BEST BUYS!

“I became frustrated when I was shopping for an electric-assist bicycle, trying to sort through the cheap junk and the expensive stuff that costs more than our motorcycles,” explained Steve Seidner, CSC’s president. “After doing extensive research, I was able to source the exact componentry to build an e-bike that is the perfect balance of quality and value.”

CSC offers two E-bike models: the XP750-26 with 26-inch wheels and the XP750-20 with 20-inch wheels. Both models are built on a strong and lightweight 6061 precision-welded aluminum frame. The frame is the “backbone” of any bike, and extra-cost features were engineered into the XP750 frames like forged dropouts, water bottle cage mounts and an aluminum bottle holder, frame tabs to mount fenders or racks, and a rear kickstand. (See the CSC Accessories, including front basket, rear rack, fenders and more HERE.)

Suspension Front Fork – with adjustments and lockout

Rider comfort and trail performance is aided by an aluminum front suspension fork with gold-anodized tubes. This upgraded fork provides 3.94 inches (100mm) of bump-absorbing travel and can be fine-tuned with eight levels of damping and spring pre-load adjustment, plus a lockout setting.

Both the 26-inch and 20-inch XP750 bikes roll on double-wall aluminum alloy wheels laced with stainless steel 12-gauge spokes. Four-inch Kenda Juggernaut tires provide a smooth ride on any surface and added traction on loose sand, rocks, and even snow! The XP750-26 wheels and tires have an outer diameter of over 30-inches for maximum ground clearance on rougher terrain, while the 20-inch wheels on the XP750-20 provides a lower center of gravity and lower seat height for added stability. Ask CSC which model is right for your intended riding. Here is a video review by Electrek that shows the differences between the two sizes.

The quality continues with lightweight aluminum pedals, crank set, and tapered handlebars. Both models provide pedal power through a dependable Shimano 7-speed freewheel (14- to 28-tooth range), Shimano Acera derailleur, and 42-tooth front drive sprocket. Gear shifts are controlled by a Shimano index shifter which clearly displays the gear selected. Inner and outer chain ring guards are included on the front crank and an added guard is attached to the frame to protect the rear derailleur.

Stopping power is provided by top-of-the-line Tektro hydraulic brakes mated with huge 180mm stainless steel discs – NOT the basic mechanical cable brakes found on most mid-range fat bikes. All these features combine to make the CSC bikes unmatched in this price range.

But there is MORE! For the same low price, the CSC E-bikes include a powerful, top-rated 750-watt Bafang motor paired with an efficient brushless controller which offers five levels of pedal-assist. The thumb-operated throttle can power the XP750 to 20 mph (max speed for Class 2 electric bikes) without even pedaling. Adding pedal power can boost maximum speed of the XP750 above 25 mph.

Both XP750 E-bikes use the same high-quality Panasonic 48-volt lithium ion batteries. Rated at 653 watt-hours of energy, this is enough for a full day of riding 25 to 40 miles, depending on the amount of pedal assistance provided by the rider. The XP750 uses a battery pack that locks into the frame’s downtube for a clean appearance.

An LCD display on the handlebars monitors speed, pedal-assist rate, battery level, trip information and even ambient temperature. Other added cost convenience and safety items are included in the FT750 packages including LED headlight, taillight, and a USB port to power electronic devices!

You will not find an E-bike with ALL these features for less anywhere. You could pay the same price or more for a NON-electric fat bike with similar construction and components! The new CSC XP750 fat tire E-bikes can be purchased now for ONLY $1,768 for the 20 inch and $1,788 for the 26 inch with free rear rack and fenders for a limited time.  This price INCLUDES free shipping anywhere in the contiguous 48 U.S. states.

This LOW, LOW price is only possible due to CSC’s high-volume production and innovative business model of selling direct to consumers. Like all CSC Motorcycles, the new XP750 E-bikes are backed by CSC’s exceptional customer service, a 12-month warranty, an inventory of 100% of the bike parts, and a full range of exclusive accessories.

Contact CSC to order your new XP750 E-bike. Ask about bike accessories, parts and tools also available from CSC. With the money you save, why not order TWO CSC fat tire bikes and share the fun?

Please note that shipping the E-bike directly to your address necessitates some very basic assembly. Buyers will need to install the handlebars, pedals, front wheel, lights, etc. But this process is easy! Mastering these few steps will help you maintain your new bike in proper operating condition. If you don’t feel up to the assembly, a friend or family member or neighborhood handyman may handle the assembly. Here is a short video that illustrates the entire assembly process.