CSC Blog

While there are a few different ways I can get to the CSC plant in the morning, none is more fun that the mountain route…Glendora Ridge Road, Glendora Mountain Road, East Fork Road, and Azusa Canyon Highway.   That’s exactly what I did on my TT250 this morning…

Yep, Motorcycle Online (the world’s oldest online motorcycle magazine) tested the CSC RC3.   I just read the review and I thought it was a good one.   You can read it here!

I’m up here in the Bay Area this weekend, exploring beautiful San Francisco, and kicking back a bit.   You know I am a Subie guy, and I found this cool video early this morning.   It’s a WRX STI at the Isle of Man, and in spots it touches 160 mph.   Enjoy…

This summer is going to see a very busy travel schedule…Baja, San Jose, China, Singapore, and Turkey.   I’ll keep you posted!

Richard is another one of our techs, and like everyone else here, he is an avid rider. Richard’s personal bike is a Suzuki Gixxer.

The one you see here is Richard’s street bike and daily driver. Richard had another Gixxer that he raced. Richard enjoys riding Angeles Crest Highway, one of the world’s great motorcycle roads. He’s also an avid cyclist, and he manages to get in something north of a hundred miles a week on a bicycle.

Derek is another one of the great guys on the CSC team, and like all of us, he has 50W oil flowing through his veins.   Yep, Derek is our kind of gearhead.

Derek has been on board several months now and I have to tell you…I’m impressed with his skills.   Derek is the guy who serviced my RX3 before our recent 2000-mile Baja run, and my bike ran flawlessly the entire time.     He graduated from the Motorcycle Mechanics Institute and this young fellow knows his business.  Derek recently bought the new Harley you see in the photos here, and it’s a cool bike.   Cool, calm, unflappable, and supremely competent…Derek is just the kind of guy you want setting up or servicing your RX3, TT250, or RC3.

You’ll remember intrepid traveler and good buddy Simon Gandolfi, perhaps the original “most interesting man in the world.”    Simon rode with us on the very first Baja run about 6 years ago, when we rode CSC-150 Mustang replicas the length of Baja and back…

Simon Gandolfi and his CSC-150 somewhere in Baja

I was happy to read this article about Simon’s new book, and I thoroughly enjoyed the photo the story included…

Simon Gandolfi on one of the CG-engine motorcycles used for his world travels

You’ll notice the engine in Simon’s bike above…it’s one of the many variants of the original Honda CG engine.    That engine formed the basis of our CSC-150 Mustang, and it is one of the most frequently-seen motorcycle engine designs on the planet.  The CG engine in all of its forms is manufactured in several countries by several manufacturers, including Zonghsen.   You’ll see them in Europe, the Middle East, Central and South America, North America, and of course, all over Asia.

In the engineering world, simple designs are elegant designs…and the CG engine is certainly that!

The CG engine is what many would consider old school technology…overhead valves (and only two of them), air cooling, a carburetor, and relatively modest power output.   But folks who would say that are missing the point entirely.  The engine was not developed to win races (although it has done a lot of that, and in fact, CSC took the MSILSF land speed record a few years ago and the CSC-150 has been used in a number of endurance events).

Syl Binau at speed, working to keep the front end down on his LSR California Scooter

TK, Arlene, and yours truly riding our CG-engined CSC-150 Mustangs in the Hell’s Loop Endurance Rally through Death Valley

Bill Murar riding a CSC-150 in the Lake Erie Loop endurance event

The CG engine was developed to take a licking and keep on ticking.   It was specifically designed to keep on trucking with little maintenance and lots of abuse, and it’s done that job very well.

You’re probably wondering:  Why all this information on the CG engine?  Well, it’s because that’s the basic engine design used in our new TT250…

The CSC TT250 engine

If you’d like to read the story behind the CG engine click here and take a look at this!

Hey, today is Sunday (Monday if you’re reading this in China, and a lot of folks do), and I’ll tell you what I mean with that title a little further down.

As I promised myself yesterday, I went to the range this morning and I brought two toys with me – the M1A I told you about earlier and a Ruger Gunsite Rifle (aka the GSR).   The GSR is chambered in 308 Winchester, just like the Springfield Armory M1A.  Whew…Ruger, Springfield Armory, Winchester…it gets confusing keeping track of all these manufacturers’ names!

The GSR is a bolt action rifle, so it will shoot just about any load.  The M1A, on the other hand, is gas-actuated, and when you reload for it the loads have to be within a certain range of powder charges and bullet weights.   Too light a bullet or too light a charge, and the action won’t cycle.  Too heavy a bullet or too heavy a charge, and you’ll bend the operating rod.   The loads I assembled last night were just perfect, and they worked fine in both rifles.   Good times.

After a nice lunch with Sue and a bit of shopping, I was out on my TT250.   While we were eating, though, Sue asked if I had bought insurance on the TT yet.   Oops!  I’d forgotten about that!   I guess I was so excited about picking up the bike that little detail got away from me.

I tried to get the bike insured online from Geico, but the TT was not in Geico’s online database yet.  I called them on their 800 number and the guy took care of me.   For another buck a year, my TT250 is now covered.   Geico comes through!

It was a dumb move on my part forgetting to get the insurance last week, but I’m good to go now.   Every once in a while when I do something dumb like this, it helps me realize I’m moving too fast and I have to pay more attention to the details.  Or, maybe I’m just dumb.   I got in a political argument with a buddy once (talking politics is always a dangerous thing to do), and he told me I was so dumb I probably needed an hour and a half to watch 60 Minutes (you know, the TV news show).   That made me laugh so hard I forgot what we were arguing about.

Anyway, before I took the TT out I rotated the shift lever up one spline, and that worked wonders.   The bike shifts a lot smoother now.  It’s easy enough to do…it took all of a minute and all was well with the world.

Today was a glorious day, and after attending to the above details I was up in the San Gabriels on my way to Mt. Baldy…

The wildflowers are still in full bloom, and I stopped to get a few photos…

You probably recognize Glendora Ridge Road.  I’ve been riding and writing about it for years.   It’s a perfect place for breaking in a new bike.  The stretch in the photo below is the actual ridgeline.    It’s a great ride.

There’s a three-way intersection at the western end of Glendora Ridge Road, and there were a few bikes parked up there this afternoon.   You can just barely make out a Suzuki GS500 parked behind my TT…

That Suzuki belongs to my new good buddy Andrew, who I met up there today.  We chatted about our bikes a bit and then we rode back to Mt. Baldy.  It was a grand ride.

Check out the sign.   This is a road known for its shenanigans.

Here’s another cool TT photo.  I couldn’t get the colors exactly the way I wanted in this photo, so I converted it to black and white.  I like it.

The shot below is one of Andrew headed toward Mt. Baldy Village, with me right behind him.   Andrew is a new rider (he’s been on two wheels for about a year), and he was putting his GS500 through its paces.   I stayed right on his tail.  He pushed the Suzuki hard, but when you get in the twisties, displacement is not the determining factor for how quickly you get through.

I had fun.   We rode the entire length of Glendora Ridge Road with Andrew trying to shake me, but he couldn’t.   When we stopped at the eastern end, Andrew said he was amazed that a 250 could keep up with him.  Hey, this little TT is a torque monster, and it really shreds in the corners.  We chatted a bit more, and Andrew told me he’s a car designer working with a well-known manufacturer.  I can’t tell you the company, but they’re from Korea and the name rhymes with Sunday…

One last shot, folks, taken from the TT saddle in one of the Mt. Baldy tunnels.

And folks, that was it for my Sunday.   I hope your weekend was as good as mine.

Here’s another nice note and a photo from our good buddy Twin Peaks Steve.

Joe:

This is about half of what I hauled on this bike to the Sierras last year.

I have no problem with pushing this bike;  I haven’t even found its limits yet!!!

Steve

Steve, thanks for writing.   We have to get together for a ride sometime soon!

Ryan shared this note from our good buddy Fred in northern California last week…

Ryan:

Thank you to all the staff at CSC (including Gerry for answering all my service questions).   Your customer service should be cloned at many other companies!

I am enjoying my RX3.  Attached below is a photo from my ride yesterday.

Fred

Hey, thanks for sending that note, Fred!  We’re glad you are enjoying your RX3.   Your red bike sure looks good against that background!

Keep those photos coming, folks…we love getting them!