Jerry Seinfeld’s Porsches…

JS-Porsche

Now here’s an opportunity, folks…Jerry Seinfeld is selling 16 of his Porsches!   It’s an interesting story and these are sure some interesting cars.   I’ve known a few guys who were really into Porsches (I’m not, but hey, whatever floats your boat).   It’s an interesting collection coming on the market, and it’s an interesting read with great photos.

Enjoy!

Posted in CSC Motorcycles | Comments Off on Jerry Seinfeld’s Porsches…

They’re here!

Hey, I have good news:  The ship transporting our 2016 RX3 motorcycles docks in Los Angeles tomorrow!  We’ll have the bikes next week, folks!

And here’s more good news:  We’re going to continue our 2016 RX3 free shipping offer only through the end of February!  If you want us to pay your shipping, call us now!

IMG_5974-650

IMG_6008-650

IMG_5956-650

IMG_6001-650

Give us a call at 909 445 0900 and we’ll fix you right up!   We have all four colors available, but that won’t last long!

Posted in CSC Motorcycles | Comments Off on They’re here!

The RX3-P and a caption contest!

We had a magnificent morning today, folks…so much so that I took one of our RX3-P motorcycles up to Azusa Canyon to grab a photo…

150211_4107Adjusted-650

It sure was a glorious day.

Busy, busy, busy…Moto Colombia is nearing completion; I’m going to have it out next week!

One more thing…it’s time for another caption contest, and the winner will get a signed copy of Moto Colombia.   Shoot your entries to me (jberk@cscmotorcycles.com) and I’ll announce the winner next week.  I included this photo from Colombia in the book, and I’d like to know what you think an appropriate caption might be!

151215_0285-650

Posted in CSC Motorcycles | Comments Off on The RX3-P and a caption contest!

RX3 High Performance Front Brake Kit Installation

“A home run.”

“A 35 when evaluated on a scale of 1 to 10.”

“A dramatic increase in stopping power.”

“Everybody will want one of these.”

These are the ways I described our new 11.5-inch front rotor high performance brake kit after Gerry installed it on my RX3 this weekend.    Mind you, I didn’t think the stock front brake was lacking.   The stock RX3 front brake is about the same as the front brake on my KLR 650 or my old Harley Softail.

This new front brake, though, is phenomenal.

150206_4058-650

Take a look at this.  The photo below shows the increase in diameter when going to the new front brake kit.   The rotor jumps up to 11.5 inches in diameter and it increases in thickness from 4mm to 5mm.   The rotor is high performance stainless steel, and you get a set of DP sintered pads with the package.   We also include the new aircraft-grade billet aluminum caliper carrier (required for the larger diameter rotor) and a set of Allen bolts to mount the rotor to your hub.   In short, the new kit includes everything you need to set up your RX3 to stop on a dime and give you 9 cents change!

150206_4016-650

Here’s what you get: The new rotor, a set of rotor bolts, the caliper carrier, and the DP sintered brake pads.   It’s $299.95 and you can get it by ordering it on our website, or by calling Ryan at 909 445 0900.

150206_3925-650

This tutorial shows you how to install the new front brake on your motorcycle.  I need to warn you in advance, though…you will be tempted, but no stoppies or stunting allowed!

You’ll want to start by removing the front wheel (please refer to our RX3 front wheel removal tutorial) and the front brake caliper (please refer to our RX3 brake maintenance tutorial).   Don’t disconnect the hydraulic line to the front caliper; it’s not necessary to do that.

Remove the front brake caliper pin.

150206_3926-650

Remove the old brake pads.

150206_3927-650

Remove the caliper mount (it’s the part the red arrows point to).

150206_3928-650

Remove the caliper clip.   You’ll want to clean that part and set it aside.  We’re going to reuse it.

150206_3931-650

150206_3929-650

Use a suitable solvent to clean the clip.

150206_3951-650

We are going to remove the threaded pins from the caliper mount that the caliper translates on.  They are Loctited in place, so we have to heat the caliper mount to allow removing the pins.

150206_3933-650

When you heat the caliper mount, don’t overdo it.  You can use a torch or a heat gun.  The trick is to get the caliper mount up to about 250 degrees Fahrenheit.   Do one pin at a time.

150206_3938-650

One pin is removed with a 12mm wrench.  Be careful not to burn yourself.

150206_3943-650

The other pin is removed with a 6mm Allen wrench.

150206_3947-650

They will be pretty funky when you take them out of the caliper mount, so clean them with solvent.

150206_3948-650

We are going to replace the old caliper mount with the new billet caliper mount.

150206_3949-650

Install the caliper mount pins in the new caliper mount.  Use blue Loctite.

150206_3952-650

150206_3953-650

150206_3955-650

150206_3956-650

150206_3957-650

Temporarily install the caliper mount on the left front fork lower.   We’re only doing this to allow torqueing the caliper pins to the correct torque.  Torque the caliper pins to 25 N-m.

150206_3958-650

150206_3960-650

150206_3965-650

Remove the caliper mount from the front fork and install the clip.  Note the clip’s orientation.

150206_3966-650

150206_39680650

Apply and distribute a light coat of grease on the caliper pins.

150206_3969-650

Slide the caliper onto the caliper mount.   Use a spray solvent to remove any dirt from the caliper spring, as shown in the photo below.

150206_3971-650

150206_3975-650

Check the brake pads on the brake pad pin to make sure they translate freely.   Replace the brake pad pin if it is worn or if it has significant surface discontinuities.

150206_3978-650

Apply blue Loctite to the brake pad pin as shown below.

150206_3981-650

Run the pin partly into the caliper and install the brake pads.   The pin fits through the hole in each of the two brake pads.

150206_3985-650

150206_3988-650

Screw the pin into the caliper using an Allen wrench or socket

150206_3990-650

Force the brake pads apart with a large flat blade screwdriver.  Use caution to not damage the brake pad surfaces.

150206_3996-650

At this point, allow the caliper to hang from the hydraulic brake line.

150206_3997-650

Or next steps involve removing the stock brake rotor.   This part is secured by 6 Allen bolts.  It is relatively easy to strip the Allen head in these bolts.   That’s one of the reasons we provide six new Allen bolts with this kit.   If you strip the Allen head, you’ll have the new Allen bolts included with the kit that you can use, but you’ll still have to get the old Allen bolt out.   That usually involves cutting metal and a lot of cussing.  Your best bet is to do as we advise here to get the old Allen bolts out.

The bolts are Loctited in place. Heat the wheel hub just like we heated the caliper mount earlier.  Heat one or two bolts at a time; do not attempt to heat the entire hub.  If you use a torch, take care not to heat the spokes or you will ruin them.  Heat the rotor Allen bolts to about 250 degrees Fahrenheit.  Use a sharp Allen wrench to remove them.

150206_4000-650

150206_4002-650

After you have removed the Allen bolts, diligently clean the rotor mounting surface and the threads.    You’ll want to remove all of the blue Loctite residue you see in the photo below.

150206_4005-650

We start this cleaning process with a solvent.

150206_4007-650

Gerry then uses a razor to remove the residue.

150206_4013-650

Gerry then touches up the rotor/hub interface area to assure there are no high spots.  This is an important part of the process.   You may have read about front brake pulsation that may occur on some RX3 motorcycles; in our experience, this is typically caused by an uneven rotor/hub interface surface.

150206_4015-650

Place the rotor on the hub.  Check to see there is no rocking due to unevenness in the rotor/hub interface area.

150206_4017-650

Apply blue Loctite to the rotor mounting bolts.

150206_4018-650

Install the rotor mounting bolts, torqueing them lightly at first to assure that the bolts’ shoulders are seated within the rotor mounting holes.

150206_4020-650

Reinstall the front wheel as described in the RX3 front wheel removal tutorial.

When we do this, we replace the original shouldered front axle pinch bolts with fully threaded Allen bolts.  They look better and we have found that these allow for more a more controlled torque application.   These bolts should be torqued to 20 N-m.  Do not over torque these bolts.  The intent is to pinch the front axle.  Do not attempt to remove the gap in the right fork lower casting.

150206_4032-650

At this point, you should torque all of the bolts on the left side of the front wheel.

150206_4039-650

The torque values are shown below.   Use a criss-cross pattern when torqueing the rotor bolts.

150206_4041-650

Clean the rotor with a solvent and wipe it clean.

150206_4042-650

Take care when first riding the motorcycle after installing the new front brake kit.   You will want to properly bed the new pads on the new rotor, so stop with light braking force a few times and gradually build up to full brake applications.    The front brake will be substantially stronger than the stock brake, so practice stopping with it to get a feel for the new brake’s power.

Posted in CSC Motorcycles | Comments Off on RX3 High Performance Front Brake Kit Installation

This is gonna be good!

As my good buddy Austin Powers would say:  Yeah, baby!

150206_4016-650

150206_4058-650

Road test and maintenance tutorial to follow shortly, so stay tuned!

Posted in CSC Motorcycles | Comments Off on This is gonna be good!

See Us in Phoenix!

We’ll be at the Phoenix International Motorcycle Show in just two weeks, folks!

141209_9878-650-Phoenix-1

Ryan and Matt will be there with the 2016 CSC RX3 and TT250 motorcycles, and it will be a hoot!   You’ll get to see the RX3’s new adjustable front forks, bar end weights and satin chrome handlebars, and all of the exciting changes we’re incorporating on the 2016 RX3.  You’ll also get to see the new TT250, the bike Motorcycle.com called the No. 1 affordable pick in 2016 motorcycles!

We hope to see you there!

Posted in CSC Motorcycles | Comments Off on See Us in Phoenix!

Carlos’ new US-spec windshield

20160206_102049-650-Carlos

On my recent Colombian expedition I rode with two great guys, Carlos and Juan.   Carlos told me he liked the windshield we have on our Norte Americano motos, and as soon as I returned to California, I shipped one to him.  Early this morning I received the photo above.  The new windshield is on Carlos’ metallic brown TT250 Adventour, and it looks good!

I was up early this morning adding photos to the new book, Moto Colombia.  Wow, writing that story is fun!   While I was doing so, I came across a photo of Juan and Carlos I took on our first day of riding in beautiful Colombia.   This photo, and many more like it, are going in the book!

151213_9951-Carlos-and-Juan

Posted in CSC Motorcycles | Comments Off on Carlos’ new US-spec windshield

TT250 Oil Pump Replacement

This maintenance tutorial addresses TT250 oil pump removal and replacement.

You should replace the oil pump if you are rebuilding the TT250 engine or if the oil does not appear to be working smoothly.  It’s difficult to tell if the oil pump is not working smoothly without removing it and checking its ability to freely rotate.   Here’s a short video that shows how the TT250 oil should rotate freely.   If there’s any doubt about the pump’s operability, replace it.

Gaining access to the oil pump involves disconnecting the rear brake lever and removing the right engine case and the centrifugal oil cleaner as outlined in the TT250 clutch replacement tutorial.

After removing the above components, remove the oil pump shroud by unbolting the two bolts shown below.

150204_3902-650

Remove the shroud.

150204_3903-650

Remove the oil pump drive chain and sprockets.  They will slide off their respective shafts.

150204_3905-650

150204_3906-650

Unbolt the two bolts securing the oil pump shown in the photo below.

150204_3907-650

150204_3908-650

Remove the oil pump.

150204_3909-650

Assembly is the reverse of disassembly.

Posted in CSC Motorcycles | Comments Off on TT250 Oil Pump Replacement

TT250 Clutch Replacement

This tutorial addresses TT250 clutch replacement.  The TT250 uses a wet multiplate clutch.

Drain the engine oil into a suitable container.   Refer to the TT250 engine oil change tutorial for instructions on how to do this.

Disconnect the rear brake lever from the rear master cylinder by removing the cotter pin and pulling the shaft out.  This will allow rotating the rear brake lever out of the way to allow removing the right engine case.

150204_3804-650

150204_3803-650

150204_3805-650

Remove the 13mm bolt securing the kick start lever and remove the kick start lever.

150204_3806-650

150204_3808-650

Loosen the handlebar clutch lever cable adjustor by screwing it all the way into the clutch lever casting.

150204_3809-650

Disconnect the clutch cable at the engine end.

150204_3810-650

Remove the 13 10mm bolts securing the right engine cover to the engine.

150204_3811-650

150204_3813-650

Tap the right engine cover lightly with a soft mallet to loosen it.

150204_3815-650

Remove the right engine cover.

150204_3816-650

At this point, you will see the engine internals on the right side of the engine.  These components are labeled here for reference during the remainder of this tutorial.

150204_3822-650

Remove the clutch actuation rod and bushing.

150204_3825-650

150204_3828-650

Remove the clutch throwout bearing.   If this bearing is worn or does not operate smoothly, replace it with a new bearing.

150204_3830-650

Remove the six clutch bolts in an even pattern by unscrewing each bolt a few turns at a time.  Do this in a criss cross pattern to allow the clutch hub to back out evenly.

150204_3832-650

150204_3836-650

Remove the clutch hub to expose the clutch springs.

150204_3838-650

We recommend replacing the clutch springs when replacing the clutch.

Remove the Circlip that secures the clutch inner basket.

150204_3843-650

For reference during reassembly, the Circlip has a sharp-cornered edge and a radiused edge on opposite sides.  The sharp edge should face away from the motorcycle during reassembly.

This is the sharp edge.

150204_3844-650

This is the rounded edge.

150204_3845-650

To remove the rest of the clutch components, it is necessary to remove the centrifugal oil cleaner.

Unscrew the three Phillips head screws on the centrifugal oil cleaner.

150204_3846-650

150204_3847-650

Remove the centrifugal oil cleaner cover.

150204_3848-72

The engine used for this tutorial only had a couple of hundred miles on it, so there was no dirt or sludge in the centrifugal oil cleaner.  On a motorcycle with much higher mileage, packed sludge will accumulate around the inner periphery of the centrifugal oil cleaner in the areas shown by the red arrows below.  Scrape this sludge out and wipe the interior of the centrifugal oil cleaner clean.

150204_3849-650

The inner portion of the centrifugal oil cleaner is secured by a castellated nut.   This nut is shown by the lower red arrow on the right in the photo below.

150204_3853-650

Use a castellated nut driver like the one shown below to remove the nut.

150204_3856-650

150204_3858-650

Remove the castellated nut.

150204_3864-650

There is a washer underneath the castellated nut.   This washer is labeled to show which side should face out.

150204_3859-650

150204_3861-650

Pull the inner portion of the centrifugal oil cleaner off of its shaft.

At this point (after removing the inner portion of the centrifugal oil cleaner), the clutch inner basket and clutch components can be removed.

150204_3866-650

150204_3867-650

150204_3869-650

150204_3871-650

The clutch consists of six fiber plates and five steel plates as shown below.  The fiber plates are all the same.   The steel plates are all the same.   The fiber plates are the outer plates on both sides of the clutch assembly.   The plates alternate in this order:

  • Fiber plate
  • Steel plate
  • Fiber plate
  • Steel plate
  • Fiber plate
  • Steel plate
  • Fiber plate
  • Steel plate
  • Fiber plate
  • Steel plate
  • Fiber plate

CSC stocks the clutch plates and the clutch springs.  Please call us at 909 445 0900 to order these components if you need them.

150204_3875-650

150204_3882-650

Inspect the clutch inner basket for any discontinuities in the notches on which the clutch plates translate.  If the clutch inner basket has surface discontinuities or excessive wear, replace it.

150204_3883-650

Similarly inspect the clutch outer basket for any surface discontinuities or excessive wear.  Replace the clutch outer basket if necessary.

150204_3884-650

The kick starter seal should be replaced if the engine cover is removed.

150204_3895-650

Inspect the oil viewing port. If any external leakage is evident, replace the oil viewing port seal.

150204_3897-650

The oil viewing port can be pushed out from the inside of the engine cover.

150204_3898-650

Before installing the new clutch plates, soak them in motorcycle oil for 24 hours.  If you don’t do this, you may ruin the new clutch.

Assembly is the reverse of disassembly.  Use a new engine cover gasket.  Torque the clutch derby bolts to 5 ft-lbs.   Torque the engine cover bolts to 15 ft lbs.  Torque the kick start lever bolt to 35 ft lbs.  Torque the centrifugal oil cleaner castellated nut to 60 ft lbs.

After installing all components, adjust the clutch as explained in the TT250 clutch adjustment tutorial.

Posted in CSC Motorcycles | Comments Off on TT250 Clutch Replacement

No. 1!

Yep, Numero Uno.   That’s what the new CSC TT250 was in Motorcycle.com magazine’s top 10 picks in affordable motorcycles in 2016!   You can read the story here:

Top 10 Affordable New Models Of 2016

That’s going to fire up the industry!   And for all you folks who are buying this new bike (as well as the CSC RX3), our compliments (along with those of Motorcycle.com magazine) to you and your good judgment!

Posted in CSC Motorcycles | Comments Off on No. 1!